Instructions:
https://caliraisedled.com/pages/overlandbedrack-installation
Approximate weight capacity ~1,100lbs
See the report on extrusion bars weight limit performance. This provides all the technical data for the extrusion which is the "weakest link" in the bed rack, though they are not weak at all! Running the simulation for 1000lbs on a 53" extrusion supported on each end. Our bed rack mounts them in the Deflection Y configuration. This is 1000lbs applied to a single bar at the weakest point in the center and it shows a deflection of 0.195" and no failure.
We do not have a full analysis of our bed rack ran through a simulation at this time, however, you can see that our racks can handle quite a bit of weight. Many customers run a large RTT up top with hi lifts or gas or recovery boards along the sides along with 360 degrees of lighting.
- This product was designed to specifically fit the 2014-2021 Tundra Bed. We cannot guarantee fitment on any other products unless otherwise specified.
- Includes hardware for installation.
- Link to installation:Read the Installation Instructions
Cali Raised LED provides a 2-year warranty on all our products. Limited warranty on third-party products, contact us directly for details.